Veröffentlichungen und Konferenzbeiträge
Veröffentlichungen und Konferenzbeiträge
- C.Y. Chen, W. Reichert, R.M. Cohen, "Diffusion-limited etching of p-GaAs in NaOH-Na2EDTA solutions", Materials Letters 19, 109 (1994).
- W. Reichert, C.Y. Chen, W.M. Li, J.E. Shield, R.M. Cohen, D.S. Simons, and P.H. Chi, "Incorporation of Zn in GaAs during organometallic vapor phase epitaxy growth compared to equilibrium", J. Appl. Phys. 77(5), 1902 (1995).
- W. Reichert, R. Lossy, J.M. González Sirgo, E. Obermeier, and J. Stoemenos, " ß-SiC deposited on SIMOX substrates: Characterization of the SiC/SOI system at elevated temperatures", in Proc. of the 6th Int'l Conf. on SiC and Related Materials, Kyoto, Japan, Sept. 18-21, 1995, Inst. Phys. Conf. Ser. No 142, (1996), pp. 129-131.
- J. von Berg, W. Reichert, E. Obermeier, Ch. Wagner, G. Krötz, and E. Niemann, "Dependence of the elastic properties of thin ß-SiC films on their crystallinity and the deposition conditions", Trans. Third International High Temperature Electronics Conference (HiTEC), Albuquerque, NM, USA, June 9-14, 1996, Vol. 2, pp. P-51 - P-57.
- W. Reichert, M. González Sirgo, J. von Berg, and E. Obermeier, "Investigation of the piezoresistive effect in high temperature implanted and in situ doped 3C-SiC films", Trans. Third International High Temperature Electronics Conference (HiTEC), Albuquerque, NM, USA, June 9-14, 1996, Vol. 2, pp. P-137 - P-142.
- R. Lossy, W. Reichert, E. Obermeier, and W. Skorupa, "Doping of 3C-SiC by implantation of nitrogen at high temperatures", J. Electronic Mat. 26(3), 123 (1997).
- R. Ziermann, J. v. Berg, W. Reichert, E. Obermeier, M. Eickhoff, and G. Krötz, "A high temperature pressure sensor with ß-SiC piezoresistors on SOI substrates", Digest of Technical Papers, Transducers 97, Chicago, Illinois, USA, June 16-19, 1997, Vol. 2, pp. 1411 - 1414.
- J.M. Bluet, S. Contreras-Azema, J. Camassel, J.L. Robert, L. Di Cioccio, W. Reichert, R. Lossy, E. Obermeier, and J. Stoemenos, "Comparison of the electrical and optical properties of 3C-SiC on SOI from various origins", Mat. Sci. Eng. B 46(1-3), 152 (1997).
- W. Reichert, D. Stefan, E. Obermeier, and W. Wondrak, "Fabrication of smooth ß-SiC surfaces by reactive ion etching using a graphite electrode", Mat. Sci. Eng. B 46(1-3), 190 (1997).
- W. Reichert, R. Lossy, M. González Sirgo, E. Obermeier, and W. Skorupa, "Investigation of the effects of high temperature implantation and post implantation annealing on the electrical behavior of nitrogen implanted ß-SiC films", Diamond and Related Materials 6, 1445 (1997).
- W. Reichert, E. Obermeier, and J. Stoemenos, "ß-SiC films on SOI substrates for high temperature applications", Diamond and Related Materials 6, 1448 (1997).
- V. Papaioannou, E. Pavlidou, J. Stoemenos, W. Reichert, and E. Obermeier, "Structural characterization of 3C-SiC epitaxially grown on Si-On-Insulator", in Proc. of the 7th Int'l Conf. on Silicon Carbide, III-Nitrides and Related Materials - ICSCIII-N'97, Stockholm, Sweden, August 31-September 5, 1997, Materials Science Forum 264-268, (1998), pp. 445-448.
- J. von Berg, R. Ziermann, W. Reichert, E. Obermeier, M. Eickhoff, G. Krötz, U. Thoma, Th. Boltshauser, and C. Cavalloni, "High temperature ß-SiC on SOI pressure sensors for combustion engines", in Proc. of the 7th Int'l Conf. on Silicon Carbide, III-Nitrides and Related Materials - ICSCIII-N'97, Stockholm, Sweden, August 31-September 5, 1997, Materials Science Forum 264-268, (1998), pp. 1101-1104.
- J. von Berg, R. Ziermann, W. Reichert, E. Obermeier, M. Eickhoff, G. Krötz, U. Thoma, C. Cavalloni, and J.P. Nendza, "Measurement of the cylinder pressure in internal combustion engines with a piezoresistive ß-SiC-on-SOI pressure sensor", Trans. Fourth International High Temperature Electronics Conference (HiTEC), Albuquerque, NM, USA, June 1998, pp. 245-249.
- W. Reichert and R.M. Cohen, "Effects of substrate orientation and surface reconstruction on patterned substrate OMVPE of GaAs", J. Electron. Mat. 29(1), 118 (2000).
- W. Reichert and R.M. Cohen, "Lateral OMVPE growth of GaAs on patterned substrates", J. Cryst. Growth 220, 364 (2000).
- L. Fu, J. Wong-Leung, P.N.K. Deenapanray, H.H. Tan, C. Jagadish, Bin Gong, R.N. Lamb, R.M. Cohen, W. Reichert, L.V. Dao, and M. Gal, "Suppression of interdiffusion in GaAs/AlGaAs quantum well structure capped with dielectric films by deposition of gallium oxide", J. Appl. Phys. 92(7), 3579 (2002).
- R. Cremer, W. Reichert, S. Kyrsta, and O. Lemmer, "Tailored super-hard CVD diamond coatings for highly demanding cutting operations", Sixth Asian-European International Conference on Plasma Surface Engineering (AEPSE 2007), Nagasaki, Japan, Sept. 24-29, 2007.
- W. Reichert, S. Kyrsta, O. Lemmer, R. Cremer, and S.M. Rosiwal, "CVD-Diamond coatings for highly demanding cutting operations", The 35th International Conference on Metallurgical Coatings and Thin Films (ICMCTF), San Diego, California, April 28 - May 2, 2008.
- T. Leyendecker, O. Lemmer, W. Reichert, and R. Cremer, "Recent improvements in CVD Diamond deposition", The 35th International Conference on Metallurgical Coatings and Thin Films (ICMCTF), San Diego, California, April 28 - May 2, 2008.
- W. Reichert, "Wie funktioniert eigentlich PVD?", Forum der Schneidwerkzeug- & Schleiftechnik 21(4), 8 (Dezember 2008).
- W. Reichert, "Technologieserie Teil II: Herstellung und Anwendung von CVD-Diamant", CemeCon Kundenmagazin Facts 34, 12 (April 2009).
- S. Bolz, H.G. Fuß, W. Reichert, K. Bobzin, and N. Bagcivan, "HPPMS: On the road to commercialization", HPPMS/HIPIMS Workshop, Colorado School of Mines, Golden, Colorado, USA, April 24, 2009.
- W. Reichert, R. Cremer, and O. Lemmer, " Hot Filament CVD - Technology and Applications", The 36th International Conference on Metallurgical Coatings and Thin Films (ICMCTF), San Diego, California, April 27 - May 1, 2009.
- S. Bolz, H.G. Fuß, W. Reichert, and Ch. Schiffers, "Latest Results in HPPMS Thin Film Coatings for Cutting Tools", 1st International IJC-PISE Workshop, Riga, Latvia, June 9-10, 2009.
- O.A. Lemmer, W. Reichert, and S. Bolz " Metallographische Analysemethoden im Produktionsalltag der Werkzeugbeschichtung", Deutsche Gesellschaft für Materialkunde e.V., 43. Metallographietagung mit Ausstellung: Metalle - Keramik - Polymere, Aachen 16.-18. September 2009.
- W. Reichert and M. Frank, "Diamantsynthese", Deutsche Gesellschaft für Materialkunde e.V., Fortbildungen: Moderne Beschichtungsverfahren, Dortmund, 10.-12. November 2009.
- W. Reichert, "Neuartige Werkzeugbeschichtungen in der Anwendung", Abschlusskolloquium Sonderforschungsbereich 442 - Umweltverträgliche Tribosysteme durch geeignete Werkstoffverbunde und Zwischenstoffe am Beispiel der Werkzeugmaschine, RWTH Aachen, 26. November 2009.
- W. Reichert, S. Bolz, and Ch. Schiffers, "HPPMS - The Next Generation of Dedicated Coatings for High Precision Cutting Tools", International Symposium on Reactive Sputter Deposition, Manchester, UK, 10.-11. Dec. 2009.
- W. Reichert, M. Alunovic, and O. Lemmer, "Leistungssteigerung bei der Zerspanung von faserverstärkten Kunststoffen durch Einsatz diamantbeschichteter Werkzeuge", 4. Aachener Oberflächenkolloquium, 11. Dezember 2009.
- Ch. Bareiß, W. Reichert, and O. Lemmer, "Pretreatment of Cemented Carbides with Different Seeding Powders for Diamond Hot Filament CVD (HF-CVD) ", The 37th International Conference on Metallurgical Coatings and Thin Films (ICMCTF), San Diego, California, April 26 - April 30, 2010.
- S. Bolz, W. Reichert, W. May, W. Kölker, O. Lemmer, and Ch. Schiffers, "Deposition of ?-Alumina by HPPMS in an Industrial Coating Unit", Twelfth International Conference on Plasma Surface Engineering (PSE 2010), Garmisch-Partenkirchen, Germany, September 13 - 17, 2010.
- Ch. Bareiß, W. Reichert, and O. Lemmer, "Characteristics of Multi-Layer Diamond Coatings on Cemented Carbides with Different Pre-Treatment Seeding Powders", Twelfth International Conference on Plasma Surface Engineering (PSE 2010), Garmisch-Partenkirchen, Germany, September 13 - 17, 2010.
- W. Reichert, "Der Vertriebsingenieur: Ausbildung und Beruf", in: Berufsstart Technik, Klaus Resch Verlag Großenkneten, 2014, p. 456.
- S. Kallweit, A. Ferrein, I. Scholl und W. Reichert, "Mobile Autonome Systeme in der Lehre am Beispiel der ROS Summer School", in: Tagungsband zur AALE-Tagung 2014, 11. Fachkonferenz, Regensburg, 2014, pp. 157-164.
- A. Ferrein, S. Kallweit, I. Scholl and W. Reichert, "Learning to program mobile robots in the ROS Summer School Series", in: Proceedings of the 6th International Conference on Robotics in Education (RiE 15), Yverdon-les-Bains, Switzerland, May 20 – 23, 2015, pp. 120-125.
- W. Reichert, "Berufseinstieg für Wirtschaftsingenieure - Bachelor oder Master?", http://www.berufsstart.de/fachrichtung/wirtschaftsingenieurwesen/wirtschaftsingenieurwesen-reichert.php, Berufsstart, 2017.
- C. Chwallek, K. Gözler und W. Reichert, "Faymonville – Wachstum als Komplexitätstreiber", in Fallstudienkompendium Hidden Champions - Innovationen für den Weltmarkt, Herausgeber J.-P. Büchler, SpringerGabler Verlag Wiesbaden, pp. 299-312, 2018.