Veröffentlichungen von

Veröffentlichungen

Prof. Dr.-Ing. Andreas Gebhardt

Monografien

3D printing : understanding additive manufacturing

Gebhardt, Andreas ; Kessler, Julia ; Thurn, Laura (2019)
München : Hanser 2019. - XVI, 204 Seiten
978-1-56990-702-3 , 978-1-56990-703-0 ebook
21 ZHU 42(2)

Produktgestaltung für die additive Fertigung

Gebhardt, Andreas ; Kessler, Julia ; Schwarz, Alexander (2019)
München : Hanser 2019. - XVI, 266 Seiten : Illustrationen, Diagramme
978-3-446-45285-5
21 ZHU 47

Additive manufacturing : 3D printing for prototyping and manufacturing

Gebhardt, Andreas ; Hötter, Jan-Steffen (2016)
Munich : Hanser Publishers 2016. - 591 S.
978-1-56990-582-1 , 978-1-56990-583-8
21 ZHU 37

3D-Drucken: Grundlagen und Anwendungen des additive manufacturing (AM)

Gebhardt, Andreas ; Kessler, Julia ; Thurn, Laura (2016)
München : Hanser 2016. - XVI, 218 Seiten
978-3-446-44672-4
21 TYX 6(2)

Additive Fertigungsverfahren : Additive Manufacturing und 3D-Drucken für Prototyping - Tooling - Produktion

Gebhardt, Andreas (2016)
München : Hanser 2016. - XXIV, 711 S. : zahlr. Ill. u. graph. Darst.
978-3-446-44401-0 , 978-3-446-44539-0
21 ZHU 25(5)

3D-Drucken in Deutschland : Entwicklungsstand, Potentiale, Herausforderungen, Auswirkungen und Perspektiven

Dobischat, Rolf ; Witt, Gerd ; Eich, Dieter ; Marschall, Herbert ; Thurn, Laura ; Kunkel, Maximilian ; Richter, Alina ; Gebhardt, Andreas (2015)
Aachen : Shaker-Verl. 2015. - 170 S. : Ill., graph. Darst.
978-3-8440-3479-0

3D-Drucken : Grundlagen und Anwendungen des Additive Manufacturing (AM)

Gebhardt, Andreas (2014)
München : Hanser 2014. - XIII, 186 S.
978-3-446-44238-2 , 978-3-446-44237-5
21 TYX 6

Generative Fertigungsverfahren : Additive Manufacturing und 3D Drucken für Prototyping - Tooling - Produktion

Gebhardt, Andreas (2013)
München : Hanser 2013. - XXIV, 637 S. : zahlr. Ill. u. graph. Darst.
978-3-446-43651-0 , 978-3-446-43652-7
21 ZHU 25(4)

Understanding Additive Manufacturing : Rapid Prototyping - Rapid Tooling - Rapid Manufacturing

Gebhardt, Andreas (2011)
München : Hanser 2011. - VIII, 164 S. : farb. Ill.
978-3-446-42552-1
21 ZHU 12

Generative Fertigungsverfahren - Rapid Prototyping - Rapid Tooling - Rapid Manufacturing, 3. Aufl.

Gebhardt, Andreas (2007)
München : Hanser 2007. - XVI, 499 S. : Ill., graph. Darst.
978-3-446-22666-1

Rapid Prototyping

Gebhardt, Andreas (2003)
Munich [u.a.] : Hanser 2003. - XV, 379 S. : Ill., graph. Darst.
3-446-21259-0
21 ZHU 29

Rapid prototyping : Werkzeug für die schnelle Produktentstehung. - 2., völlig überarb. Aufl.

Gebhardt, Andreas (2000)
München [u.a.] : Hanser 2000. - XVII, 409 S. : Ill., graph. Darst.
3-446-21242-6
21 ZHU 25(2)

Kapitel in einem Sammelwerk

Introduction to Additive Manufacturing

Fateri, Miranda ; Gebhardt, Andreas (2020)
3D Printing of Optical Components. Cham : Springer 2020. Seite: 1 - 22
978-3-030-58960-8

Rapid Tooling

Gebhardt, Andreas ; Hoetter, Jan-Steffen (2019)
CIRP Encyclopedia of Production Engineering. Berlin, Heidelberg : Springer 2019. Seite: 39 - 52
978-3-662-53120-4

Entwicklung der 3D-Drucktechnologie und Potenziale für die Anwendung im Mittelstand

Gebhardt, Andreas (2013)
Innovation durch Kooperation : wie der Mittelstand durch Zusammenarbeit mit den Hochschulen seine Wettbewerbsfähigkeit steigert : Festschrift für Prof. Dr. rer. nat. Johannes Gartzen / Thomas Gartzen, Ute Gartzen (Hrsg.). Aachen : Apprimus Verlag 2013. Seite: 55 - 59
978-3-86359-136-6
21 PZI 73

Zeitschriftenartikel

Improving the Mechanical Strength of Dental Applications and Lattice Structures SLM Processed

Cosma, Cosmin ; Kessler, Julia ; Gebhardt, Andreas ; Campbell, Ian ; Balc, Nicolae (2020)
Materials. Basel : MDPI. 13 (2020), H. 4. Seite: 1 - 18
1996-1944

Tribological performance of biodegradable lubricants under different surface roughness of tools

Bucur, Alexandru ; Lazarescu, Lucian ; Pop, Grigore Marian ; Achimas, Gheorghe ; Gebhardt, Andreas (2019)
Academic Journal of Manufacturing Engineering. . 17 (2019), H. 1. Seite: 172 - 178
1583-7904

Quality assurance in metal powder bed fusion via deep-learning-based image classification

Kunkel, Maximilian Hugo ; Gebhardt, Andreas ; Mpofu, Khumbulani ; Kallweit, Stephan (2019)
Rapid Prototyping Journal. . 26 (2019), H. 2. Seite: 259 - 266
1355-2546

New Welding Joint Geometries Manufactured by Powder Bed Fusion from 316L

Schwarz, Alexander ; Gebhardt, Andreas ; Schleser, Markus ; Popoola, Patricia (2019)
Materials Performance and Characterization 8. . (2019), H. in press.
2379-1365

Machbarkeitsstudie zur Verarbeitung von nicht rostendem Stahl 1.4404 unter Verwendung einer Diodenlaser-basierten LPBF-Maschine mit kartesischem Achssystem

Ziebura, Dawid ; Bremen, Sebastian ; Schleifenbaum, Johannes Henrich ; Gebhardt, Andreas (2018)
RTejournal - Forum für Rapid Technologie. . 15 (2018).
1614-0923

Statistical assessment of mechanical properties of selective laser melted specimens of stainless steel

Kunkel, Maximilian Hugo ; Gebhardt, Andreas ; Mpofu, Khumbaulani ; Kallweit, Stephan (2018)
The International Journal of Advanced Manufacturing Technology. London : Springer. 98 (2018), H. 5-8. Seite: 1409 - 1431
0268-3768

Selective Laser Melting of the Eutectic Silver-Copper Alloy Ag 28 wt % Cu

Rieper, Harald ; Gebhardt, Andreas ; Stucker, Brent (2016)
RTejournal - Forum für Rapid Technologie. . 13 (2016).
1614-0923

Selective Laser Melting of Soda-Lime Glass Powder

Fateri, Miranda ; Gebhardt, Andreas (2015)
International Journal of Applied Ceramic Technology. Oxford : Wiley-Blackwell. 12 (2015), H. 1. Seite: 53 - 61
1744-7402

Process Parameters Development of Selective Laser Melting of Lunar Regolith for On-Site Manufacturing Applications

Fateri, Miranda ; Gebhardt, Andreas (2015)
International Journal of Applied Ceramic Technology. Oxford : Wiley-Blackwell. 12 (2015), H. 1. Seite: 46 - 52
1744-7402

Additive manufactured mechanical disentanglement lock

Fateri, Miranda ; Gebhardt, Andreas (2015)
RTejournal - Forum für Rapid Technologie. Aachen : Fachhochschule Aachen. 12 (2015).
1614-0923

Basic Research on Lattice Structures Focused on the Tensile Strength

Kessler, Julia ; Balc, Nicolae ; Gebhardt, Andreas ; Abbas, Karim (2015)
Applied Mechanics and Materials. Bäch : Trans Tech Publications. Vol. 808 (2015). Seite: 193 - 198
1662-7482

Entwurf, Fertigung und Untersuchung eines Windkanalmodells eines innovativen, senkrechtstartenden Kleinflugzeuges

Hoeveler, Bastian ; Janser, Frank ; Bindewald, Thorsten ; Gebhardt, Andreas (2015)
RTejournal - Forum für Rapid Technologie. Aachen : Fachhochschule Aachen. (2015), H. 12. Seite: 1 - 5
1614-0923

3D-Druck ist überall. Modische Accessoires, Kleidung, Medikamente, Nahrungsmittel, Autos, Häuser, Waffen, Büsten, Musikinstrumente - alles geht

Gebhardt, Andreas (2015)
Kunststoffe. München : Hanser. 105 (2015), H. 10. Seite: 62 - 70
0023-5563

3D-Drucken und die Anwendungen

Gebhardt, Andreas ; Fateri, Miranda (2014)
RTejournal - Forum für Rapid Technologie. . 11 (2014) (2014), H. 1. Seite: 1 - 9
1614-0923

Impact of SLM build parameters on the surface quality

Gebhardt, Andreas ; Hötter, Jan-Steffen ; Ziebura, Dawid (2014)
RTejournal - Forum für Rapid Technologien. . 11 (2014) (2014), H. 1. Seite: 1 - 14
1614-0923

Experimental investigation on selective laser melting of glass

Fateri, Miranda ; Gebhardt, Andreas ; Thümmler, Stefan ; Thurn, Laura (2014)
Physics procedia : 8th International Conference on Laser Assisted Net Shape Engineering LANE 2014. Amsterdam : Elsevier. 56 (2014) (2014). Seite: 357 - 364
1875-3892 (E-Journal) , 1875-3884 (Print)

3D printing and its applications

Gebhardt, Andreas ; Fateri, Miranda (2013)
RTejournal - Forum für Rapid Technologie. Aachen : Fachhochschule Aachen. 10 (2013), H. 1.
1614-0923

Experimental and Theoretical Investigation of Buckling Deformation of Fabricated Objects by Selective Laser Melting

Fateri, Miranda ; Hötter, Jan-Steffen ; Gebhardt, Andreas (2012)
Physics Procedia. Amsterdam : Elsevier. 39 (2012). Seite: 464 - 470
1875-3892

Prozessoptimierung des SLM-Prozesses mit hoch-reflektiven und thermisch sehr gut leitenden Materialien durch systematische Parameterfindung und begleitende Simulationen am Beispiel von Silber

Hötter, Jan-Steffen ; Fateri, Miranda ; Gebhardt, Andreas (2012)
RTejournal - Forum für Rapid Technologie. Aachen : Fachhoschule Aachen. 9 (2012), H. 1. Seite: 1 - 14
1614-0923

Selective laser melting of metals: desktop machines open up new chances even for small companies

Hötter, Jan-Steffen ; Fateri, Miranda ; Gebhardt, Andreas (2012)
Advanced materials research. Baech : Trans Tech Publ.. 622-623 (2012). Seite: 461 - 465
1662-8985 (E-Journal) , 1022-6680 (Print)

Additive Manufacturing by selective laser melting the realizer desktop machine and its application for the dental industry

Gebhardt, Andreas ; Schmidt, Frank-Michael ; Hötter, Jan-Steffen ; Sokalla, Wolfgang ; Sokalla, Patrick (2010)
Physics Procedia. Seite: 543 - 549
1875-3892

Hype um Generative Verfahren. Generative Verfahren zur Herstellung von Kleinserien durchlaufen die Phase eines Booms

Gebhardt, Andreas (2008)
Economic Engineering (2008). Seite: 76 - 79
1436-3348

Rapid Manufacturing - eine interdisziplinäre Strategie

Gebhardt, Andreas (2006)

Generative Manufacturing of Ceramic Parts "Vision Rapid Prototyping"

Gebhardt, Andreas (2006)

Rapid Prototyping für metallische Werkstücke: Direkte und indirekte Verfahren

Gebhardt, Andreas (2005)

RP gestützte Herstellung komplexer transparenter Hohlräume für die Strömungsanalyse

Gebhardt, Andreas ; Brücker, Christoph ; Schmidt, Frank-Michael (2005)

Rapid Prototyping

Gebhardt, Andreas (2004)
Landolt-Börnstein - Group VIII Advanced Materials and Technologies‡Vol. 1 Laser Physics and Applications‡Subvol. C Laser Applications / authors: Bäuerle, D. .... Springer : Heidelberg. (2004). - XVIII, 495 S. : Ill., graph. Darst. + 1 CD-ROM (12Seite: 105 - 123
3-540-00105-0

Grundlagen des Rapid Prototyping: Eine Kurzdarstellung der Rapid Prototyping Verfahren

Gebhardt, Andreas (2004)

Rapid Prototyping : Grundlagen, Verfahren und Einsatzkriterien für die industrielle Praxis

Gebhardt, Andreas (2003)
Konstruieren mit Kunststoffen. - 3. Aufl.. Düsseldorf : Springer -VDI-Verl.. (2003).
3-935065-13-2

Practical experiences with making and finishing of coloured models using 3D printing

Gebhardt, Andreas ; Schmidt, Frank-Michael (2002)

Virtual Reality oder Rapid Prototyping?

Gebhardt, Andreas (2002)
Zeitschrift für die gesamte Wertschöpfungskette Automobilwirtschaft (2002).

Vakuumgiessen innerhalb der Produktentstehung

Gebhardt, Andreas (2002)
Form und Werkzeug (2002).

Potenziale und Grenzen virtueller Prototypen

Gebhardt, Andreas (2002)

Rapid Prototyping and PIV

Gebhardt, Andreas (2001)

Laserwelding with fillerwire

Gebhardt, Andreas (2001)
LIA handbook of laser material processing / Laser Institute of America. Orlando, Florida : . (2001).
3-540-41770-2

Entwicklungstendenzen und neue Systeme im Rapid Prototyping

Gebhardt, Andreas (2001)
Industrie Management. 17 (2001), H. 3. Seite: 42 - 46
1434-1980

Materialfrage führt häufig zu Trugschlüssen. Wunsch und Wirklichkeit im Rapid Prototyping - Teil 2

Gebhardt, Andreas (2000)
Industrieanzeiger. 122 (2000), H. 4. Seite: 41 - 41
0019-9036

Schnell und flexibel zur Kleinserie. Effizienzsteigerung bei der Realisierung von Komponenten und Teilsystemen

Gebhardt, Andreas (1999)
Ingenieur-Werkstoffe. 8 (1999), H. 3. Seite: 8 - 14
0935-5715

Marktentwicklung im Rapid Prototyping

Gebhardt, Andreas (1999)
Kunststoffe, München. 89 (1999), H. 11. Seite: 50 - 55
0023-5563

Rapid Tooling. Der schnelle Weg zum Spritzgießwerkzeug.

Gebhardt, Andreas (1998)
Kunststoffe, München. 88 (1998), H. 11. Seite: 1992 - 2000
0023-5563

Lasereinsatz in der Fertigung der Fahrzeugindustrie. Grundlagen der Anwendung von Lasern zur Materialbearbeitung

Gebhardt, Andreas (1997)
Seite: 1 - 154

Aktuelle Trends bei RP und RT

Gebhardt, Andreas (1997)
Kunststoffe, München. 87 (1997), H. 1. Seite: 27 - 30
0023-5563

Schweißen mit dem Nd:YAG-Laser

Gebhardt, Andreas ; Guntermann, P. ; Häming, L. (1997)
Der Praktiker, Schweißen und Schneiden. 49 (1997), H. 4. Seite: 170 - 172
0554-9965

Serienqualität und -stückzahlen durch Abformprozesse

Gebhardt, Andreas ; Mathar, W. ; Plum, H-D. ; Wolf, M. (1996)
Seite: 147 - 159

Rapid Prototyping und Tooling

Gebhardt, Andreas ; Schmachtenberg, E. (1996)
Seite: 1 - 20

TrueForm - erste Anwendung des neuen Sintermaterials mit Vakuumgießen und Investmentgießen

Gebhardt, Andreas ; Plum, H.D. ; Mathar, W. ; Wolf, M. (1996)
Seite: 231 - 236

Neue Impulse für den Leichtbau. Ein Konstruktionsprinzip für Verbauplatten mit Laserschweißen am verdeckten Stoß.

Gebhardt, Andreas ; Guntermann, P. ; Saur, G. ; Gartzen, Johannes (1996)
Laser-Praxis (1996). Seite: 21 - 24
0937-7069

Rapid Prototyping - Laser-gestützte Revolution der Produktentwicklung. Teil I

Gebhardt, Andreas (1996)
Laser Magazin (1996). Seite: 6 - 9
0945-8875

Innovationsschub mittels Rapid-Prototyping. Teil I

Gebhardt, Andreas ; Pflug, T-K. (1995)
CAD-CAM Report. 14 (1995), H. 7. Seite: 56 - 65
0930-7117

Beschichten von Kurbelzapfen mit CO2-Laserstrahlung. Energietechnik

Gebhardt, Andreas ; Backes, G. ; kramer, T. ; Kreutz, E.-W. (u.a.) (1995)
Maschinenmarkt. 101 (1995), H. 12. Seite: 42 - 45
0341-5775

Innovationsschub mittels Rapid-Prototyping, Teil II

Gebhardt, Andreas ; Plug, T-K. (1995)
CAD-CAM Report. 14 (1995), H. 9. Seite: 78 - 85
0930-7117

SFM-System Stereolithographie und selektives Lasersintern im Vergleich

Gebhardt, Andreas ; Mathar, W. ; Plum, H.-D. (1994)
Seite: 85 - 95

Auftragsabwicklung und branchenspezifische Anforderungen an SFM-Modelle -am Beispiel medizinischer Modelle

Gebhardt, Andreas ; Mathar, W. (1994)
Seite: 188 - 191

Laserstrahlschweißen mit Schweißdraht von Wärmetauschern mit hohem Wirkungsgrad

Gartzen, Johannes ; Gebhardt, Andreas ; Anger, A. ; Petschke, U. ; Lingens, Hans (1994)
Proceedings : Aachen, Germany, 31st October - 4th November, 1994 / 27th ISATA. Croydon : Automotive Automation. (1994). Seite: 397 - 403
0-947719-64-4

Flow Visualization in a Cavitating Flow

Dues, M. ; Gebhardt, Andreas ; Kallweit, Stephan ; Scheffler, T. ; Siekmann, H. ; Uchiyama, T. (1994)
Proceedings of the German-Japanese Symposium on Multi-Phase Flow : Karlsruhe, Germany, August 23 - 25, 1994 / comp. by U. Müller .... Karlsruhe : Kernforschungszentrum Karlsruhe. (1994). - VI, 574 S. : Ill., graph. Darst.Seite: 391 - 402

Laserhärten - im Verbund möglich. Forschungsverbund Lasertechnik NRW auf der Suche nach neuen Laseranwendungen

Gartzen, Johannes ; Lingens, Hans ; Schönbohm, J. ; Baumjohann, F. ; Gebhardt, Andreas (1993)
Technica, Rupperswil. 42 (1993), H. 24. Seite: 14 - 18
0040-866X

Härten von Kurbelwellen

Gebhardt, Andreas (1989)
Seite: 1 - 14

Konferenzschriften

Studie zur Untersuchung der Auswirkung von Fräsbahnstrategien auf die Oberflächenqualität von mittels SLM gefertigten Metallteilen

Pfeiffer, Johann ; Balc, N. ; Gebhardt, Andreas (2021)
Tagungsband 21. Nachwuchswissenschaftler*innenkonferenz. Jena : Verlag Ernst-Abbe-Hochschule Jena 2021. Seite: 99 - 102
21. Nachwuchswissenschaftler*innenkonferenz, Ernst-Abbe-Hochschule Jena 26. und 27. Mai 2021

Challenges of additive manufacturing in production systems

Luft, Angela ; Gebhardt, Andreas ; Balc, Nicolae (2019)
Modern technologies in manufacturing (MTeM 2019). 2019. - 6 Seiten
MATEC Web of Conferences 299; MTeM 2019

Innovative Laserschweißtechnologie für additiv gefertigte Bauteile

Otten, Christian ; Gerhards, Benjamin ; Schleser, Markus ; Schwarz, A. ; Gebhardt, Andreas (2019)
Große Schweißtechnische Tagung. Düsseldorf : DVS-Media 2019. Seite: 150 - 157
DVS CONGRESS 2019, Große Schweißtechnische Tagung, DVS-Studentenkongress. 16. bis 17. September 2019, Düsseldorf. DVS-Berichte, Band 355

Innovative Laser Beam Joining Technology for Additive Manufactured Parts

Gerhards, Benjamin ; Schleser, Markus ; Otten,, Christian ; Schwarz, Alexander ; Gebhardt, Andreas (2019)
Conference Proceedings 72nd IIW Annual Assembly and International Conference, 7-12 July 2019, Bratislava. 2019. Seite: 1 - 8

Strategy of Education on Materials for Students

Thurn, Laura ; Gebhardt, Andreas (2018)
Conference Proceedings: „New Perspectives in Science Education". Florence, Italy : 2018. Seite: 156 - 161

Basic research on lattice structures focused on the reliance of the cross sectional area and additional coatings

Kessler, Julia ; Balc, Nicolae ; Gebhardt, Andreas ; Abbas, Karim (2017)
The 4th International Conference on Computing and Solutions in Manufacturing Engineering 2016 – CoSME’16. 2017. - 7 S.
MATEC Web Conf. Vol 94, 2017, 03008 MATEC Web of Conferences 94, 03008 (2017)

Arousing Enthusiasm for STEM: Teaching 3D Printing Technology

Thurn, Laura ; Gebhardt, Andreas (2017)
Conference Proceedings: New Perspectives in Science Education. Padua : liberiauniversitaria.it 2017. - 5 SeitenSeite: 87 - 92

Education packed in technology to promote innovations: Teaching Additive Manufacturing based on a rolling Lab

Thurn, Laura ; Balc, Nicolae ; Gebhardt, Andreas ; Kessler, Julia (2017)
Modern Technologies in Manufacturing (MTeM 2017 - AMaTUC). 2017. - 6 Seiten
MATEC Web Conf. Volume 137, 2017 Matec Web of Conferences., 137(2017)02013

Basic research on lattice structures focused on the strut shape and welding beads

Kessler, Julia ; Balc, Nicolae ; Gebhardt, Andreas (2016)
Physics Procedia. 2016. Seite: 833 - 838
Laser Assisted Net Shape Engineering 9th International Conference on Photonic Technologies Proceedings of the LANE 2016

Process parameters for Selective Laser Melting of AgCu7

Rieper, Harald ; Gebhardt, Andreas ; Stucker, Brent (2016)
DDMC, Fraunhofer Direct Digital Manufacturing Conference, 3. Stuttgart : Fraunhofer-Verlag 2016. Seite: 171 - 176
DDMC, 2016, Fraunhofer Direct Digital Manufacturing Conference, 3rd, Berlin, DE, 2016-03-16 - 2016-03-17

Generative Fertigungsverfahren in der Produktentwicklung

Gebhardt, Andreas (2015)
Spritzgießen 2015. Düsseldorf : VDI-Verlag 2015. Seite: 1 - 19

Overview of the MultiRob 3D Lunar Industrial Development Project

Großmann, Agnes ; Gabrielli, Roland Antonius ; Herdrich, Georg ; Fasoulas, Stefanos ; Schnauffer, Peter ; Middendorf, Peter ; Fateri, Miranda ; Gebhardt, Andreas (2015)
Conference Contribution for the 30th ISTS, Kobe, Japan, 04.07.-10.07.2015. 2015. - 8 S.

System Architecture of a Lunar Industry Plant Using Regolith

Gabrielli, Roland Antonius ; Seelmann, Jürgen ; Großmann, Agnes ; Herdrich, Georg ; Fasoulas, Stefanos ; Middendorf, Peter ; Fateri, Miranda ; Gebhardt, Andreas (2015)
Conference Contribution for the 30th ISTS, Kobe, Japan, 04.07.-10.07.2015. 2015. - 8 S.

Improving additive manufacturing by image processing and robotic milling

Alhwarin, Faraj ; Ferrein, Alexander ; Gebhardt, Andreas ; Kallweit, Stephan ; Scholl, Ingrid ; Tedjasukmana, Osmond Sanjaya (2015)
2015 IEEE International Conference on Automation Science and Engineering (CASE), Aug 24-28, 2015 Gothenburg, Sweden. 2015. Seite: 924 - 929

Integration des Laserpolierens in den SLM-Prozess

Wiezik, P. ; Hötter, Jan-Steffen ; Gebhardt, Andreas (2015)
DVS Congress 2015, Große Schweißtechnische Tagung, DVS-Studentenkongress, Fügen von faserverstärkten Kunststoffen, Anwendungsnahe Schweißsimulation, Vorträge der Veranstaltungen, Nürnberg, DE, 15.-17. Sep, 2015. Düsseldorf : Verl. für Schweißen und verwandte Verfahren, DVS-Verl. 2015. Seite: 117 - 120

Additive Manufacturing of Lunar Regolith for Extra-terrestrial Industry Plant

Fateri, Miranda ; Gebhardt, Andreas ; Gabrielli, Roland Antonius ; Herdrich, Georg ; Fasoulas, Stefanos ; Großmann, Agnes ; Schnauffer, Peter ; Middendorf, Peter (2015)
International Symposium on Space Technology and Science (ICTS). July 2015, Kobe, Japan. 2015. - 5 S.

Space Propulsion Considerations for a Lunar Take Off Industry Based on Regolith

Gabrielli, Roland Antonius ; Mathies, Johannes ; Großmann, Agnes ; Herdrich, Georg ; Fasoulas, Stefanos ; Middendorf, Peter ; Fateri, Miranda ; Gebhardt, Andreas (2015)
International Symposium on Space Technology and Science (ISTS). July 2015, Kobe, Japan. 2015.

Additive Manufacturing of Drainage Segments for Cooling System of Crucibles Melting Furnaces

Fateri, Miranda ; Gebhardt, Andreas ; Renftle, Georg (2015)
International Conference and Expo on Advanced Ceramics and Composites, (ICACC). January 2015, Florida, USA. 2015. - 9 S.

Additive manufacturing of drainage segments for cooling system of crucible melting furnaces

Fateri, Miranda ; Gebhardt, Andreas ; Renftle, Georg (2015)
Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials II, International Symposium on Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials, ICACC 15, 39th International Conference on Advanced Ceramics and Composites, Daytona Beach, FL, US, Jan 25-30, 2015. Hoboken : Wiley 2015. Seite: 123 - 131

Jewelry fabrication via selective laser melting of glass

Fateri, Miranda ; Gebhardt, Andreas (2014)
ASME 2014 12th Biennial Conference on Engineering Systems Design and Analysis Volume 1: Applied Mechanics; Automotive Systems; Biomedical Biotechnology Engineering; Computational Mechanics; Design; Digital Manufacturing; Education; Marine and Aerospace Applications. 2014. - 5 pagesSeite: V001T06A005

Additive manufacturing businesses in the process chain of individualized mass products

Gebhardt, Andreas ; Ritz, Thomas ; Siekmann, Kirsten ; Wallenborn, Ramona (2014)
DDMC 2014 : Proceedings of the Fraunhofer Direct Digital Manufacturing Conference. Stuttgart : Fraunhofer 2014.

Experimental investigation of selective laser melting of lunar regolith for in-situ applications

Fateri, Miranda ; Gebhardt, Andreas ; Khosravi, Maziar (2013)
ASME 2013 International Mechanical Engineering Congress and Exposition : San Diego, California, USA, November 15–21, 2013. Vol. 2A: Advanced manufacturing. ASME 2013. Seite: V02AT02A008

Technology Diffusion through a Multi-Level Technology Transfer Infrastructure. Contribution to the 1st. All Africa Technology Diffusion Conference Boksburg, South Africa June 12th - 14th 2006

Gebhardt, Andreas (2006)
2006.

Farbige Prototypen als Werkzeug für den Konstrukteur
Colored prototypes as instrument for the constructing engineer

Gebhardt, Andreas ; Schmidt, Frank-Michael (2005)
2005.

Weitere Publikationen

Übungsklausur zum Fach Werkstoffkunde 3

Gebhardt, Andreas (2005)
2005.

Fertigungsverfahren I : Urformen ; Skript zur Vorlesung

Gebhardt, Andreas (2005)
2005.

Fertigungsverfahren I : Umformen ; Skript zur Vorlesung

Gebhardt, Andreas (2005)
2005.

Übungsklausur zum Fach Fertigungsverfahren 1

Gebhardt, Andreas (2005)
2005.

Regelungstechnik : Skript zur Vorlesung

Gebhardt, Andreas (2005)
2005.

Digitale Regelungstechnik

Gebhardt, Andreas (2005)
2005.

Fuzzy Regelung

Gebhardt, Andreas (2005)
2005.

Übungsklausur zum Fach Regelungstechnik

Gebhardt, Andreas (2005)
2005.

Lasertechnologie : Laser - Materialbearbeitung ; Grundlagen - Verfahren - Anwendungen

Gebhardt, Andreas (2005)
2005.

Übungsklausur zum Fach Lasertechnologie

Gebhardt, Andreas (2005)
2005.

Lasermesstechnik 1

Gebhardt, Andreas (2005)
2005.

Lasermesstechnik 2

Gebhardt, Andreas (2005)
2005.

Zusammenfassung der Inhalte der Veranstaltung Lasertechnologie zur Vorbereitung auf die schriftliche Klausur

Gebhardt, Andreas (2005)
2005.

Rapid Prototyping : Werkzeuge für die schnelle Produktentwicklung

Gebhardt, Andreas (2005)
2005.

Short course on rapid prototyping

Gebhardt, Andreas (2005)
2005.

Zusammenfassung der Inhalte der Veranstaltung Rapid Prototyping zur Vorbereitung auf die schriftliche Klausur

Gebhardt, Andreas (2005)
2005.

Übungsklausur zum Fach Rapid Prototyping

Gebhardt, Andreas (2005)
2005.

Werkstoffkunde III : Werkstoff- und Verfahrenskunde für die spanlosen Fertigungsverfahren, Pulvermetallurgie, Oberflächentechnik, Abtragen ; Skript zur Vorlesung

Gebhardt, Andreas (2005)
2005.